files/2416.jpg

Custom Works Brass 15 Deg Front Suspension Mount 3mm Threads (1) CW-2416

BRASS FRONT SUSPENSION MOUNT 15º (3MM)

17.6g heavier than the stock aluminum version.

Note: The upper hinge pin hole is stock, and should be used to avoid any chassis modifications. Running the lower hole may require your chassis to be clearanced (at your own risk) for the back side of the front suspension arms to clear.

Be sure to also use an M3x6 FH screw to secure the rear of the mount to the chassis. Any longer screw may thread in too far and damage your hinge pin.

Custom Works RC

Brass 15 Deg Front Suspension Mount 3mm Threads (1) CW-2416

SKU cw-2416

Regular price: $25.⁰⁰

Custom Works Brass 15 Deg Front Suspension Mount 3mm Threads (1) CW-2416

BRASS FRONT SUSPENSION MOUNT 15º (3MM)

17.6g heavier than the stock aluminum version.

Note: The upper hinge pin hole is stock, and should be used to avoid any chassis modifications. Running the lower hole may require your chassis to be clearanced (at your own risk) for the back side of the front suspension arms to clear.

Be sure to also use an M3x6 FH screw to secure the rear of the mount to the chassis. Any longer screw may thread in too far and damage your hinge pin.

Regular price: $25.⁰⁰

Quantity

Product Description

Custom Works Brass 15 Deg Front Suspension Mount 3mm Threads (1) CW-2416

BRASS FRONT SUSPENSION MOUNT 15º (3MM)

17.6g heavier than the stock aluminum version.

Note: The upper hinge pin hole is stock, and should be used to avoid any chassis modifications. Running the lower hole may require your chassis to be clearanced (at your own risk) for the back side of the front suspension arms to clear.

Be sure to also use an M3x6 FH screw to secure the rear of the mount to the chassis. Any longer screw may thread in too far and damage your hinge pin.