Tekin RS PRO 1s Black Edition ESC
  Top » Catalog » ESC's » TEK1161

Tekin RS PRO 1s Black Edition ESC
[TEK1161]

$229.95

RS Pro 1S Black Edition Professional Sensored Brushless ESC

Tekin's SPEC-R brushless motors are professional racing power plants designed to squeeze out every ounce of power available and propel you to the finish line first. Based on the widely popular GEN3 motor platform, the SPEC-R brings new technology to the racetrack. Tekin's ULR (ultra low resistance) design puts top shelf performance in your RC racing vehicle using proprietary specifications and the highest grade materials available for ultra smooth control across a wide powerband. ULR technology and a Yellow High Strength Rotor make the SPEC-R lineup of motors the premium choice for stock racing. Drop a SPEC-R motor in your chassis and leave your competition in the dust. Combine the SPEC-R motors with the RS Pro Black Edition ESC for the ultimate in Ultra Low Resistance systems
Weight: 1.23oz / 35g
Dimensions: 1.0 x 1.3 x .68in / 24.5 x 33 x 17.25mm
*Requires HotWire Sold Separately

Features: •ULR: Ultra Low Resistance Design
• Specifically Designed for Spec & Stock Racing
• QuickTune™ One Touch Programming
• Adjustable Throttle and Brake Frequencies *
• High Voltage Programmable BEC *
• HotWire™ Programming Port *
• Data Logging Capability *
• Sensor Checker
• On-Board Temperature Indicator
• ESC Self Diagnostics with Error Codes
• Fully Proportional Forward/Brake/Reverse
• Brushless and Brushed Motor Drive
• Sensored or Sensorless Operation
• LiPo Safe with Custom Voltage Cutoffs
• Sensor Plug for Precise Commutation
• Lightweight Chassis Design
• HDAC: High Density Copper PCB's
• Ultra-smooth and Precise Throttle and Braking Control

Programming:
•DB - Drag Brake (13 steps)
•BS - Brake Strength (13 steps)
•LM - Torque Limiter (7 steps)
•NW - Neutral Width (13 steps)
•TP - Timing Profiles 5 Preset
•MT - Motor Type
•Brushless Modes - FWD Only / FWD-REV / FWD-REV Delay / FWD-REV
Delay REV Motor Direction
•Brushed Modes - FWD Only / FWD-REV / FWD-REV Delay
•VC - Voltage Cutoff : RS Pro - 2S, 3S

Hotwire Programming options:
•Update ESC Firmware*
• Create, Save, Load and Share Custom ESC Profiles*
• Drag Brake (0-100 steps)*
• Brake Strength (0-100 steps)*
• Brake Minimum (0-30 steps)*
• Active Braking (0-6 steps)*
• Brake Frequency (750hz - 12kHz)*
• Throttle Minimum (0-30 steps)*
• Throttle Frequency (2kHz - 12kHz)*
• Torque Limiter (0-10 steps)*
• Reverse Speed (0-100 steps)*
• Reverse Delay (0-2seconds)*
• Neutral Width (0-100 steps)*
• Push Control (0-100 steps)*
• Timing Profiles 5 Preset - 2 Custom*
• Locked Spec Mode*
• Boost (0-55 steps)*
• Boost RPM Range (user programmable)*
• Turbo (0-50 steps)*
• Turbo Delay (0-2seconds)*
• Turbo Ramp (1-10 steps)*
• Sensored Only Mode*
• Dual Drive Mode*
• Motor Type
•Brushless Modes - FWD Only / FWD-REV / FWD-REV Delay / REV Motor Rotation
•Brushed Modes - FWD Only / FWD-REV / FWD-REV Delay
• Voltage Cutoff - 2S, 3S, Custom*
• 1S LiPo Mode

Specs:
Controls: Forward/Brake/Reverse
Input Voltage RS Pro : 1S LiPo / 4S NiMH-NiCD
Motor Limit Brushless Mode 1S: 36mm Can - 2-Pole
Motor Limit Brushed 1S: 36mm Can - 540 & 550
Amperage: 480Amps per phase*
ON Resistance: .000096ohm*
BEC: 6.0 / 7.4V @ 5.5amps
part number - TEK1161
stock status -Temporarily Out of Stock